Valspar® Prep Step® Whole House Primer

Valspar

$39.99
Unit price per

Options

This primer provides high quality adhesion for oil or latex topcoats. A durable, whole house primer that features great flexibility on bare or weathered wood. The fast drying formulation also cleans up easily with soap and water. Plus it gives a mildew resistant coating.

Ideal for siding, trim and foundations
Improves topcoat adhesion, durability and finish
Creates a mold-, mildew-, and algae-resistant finish
Applies in temperatures as low as 35°F

Coverage: 300 ft²/gal - 400 ft²/gal

HOW TO USE

Usage

This paint is ideal for use on properly prepared exterior surfaces including bare wood, previously painted wood siding and trim, brick, concrete, cement, stucco, non-rusted galvanized gutters and downspouts. DO NOT USE over hardboard siding or gummy pine; use an exterior oil primer for these surfaces.
Prep

Surface should be clean, dry and dull. Glossy surfaces should be dulled. Thoroughly clean the surface and remove all dirt, dust, chalk, rust, grease, wax, mildew and peeling paint and allow to dry. See technical data page for additional surface prep.
Application

Stir thoroughly before and during use. Apply with a premium quality polyester brush, “one coat” roller or airless sprayer. If applying by sprayer, back-roll or back-brush to work primer into the surface. Apply a liberal coat of primer uniformly, working well into the surface. Allow to dry at least 2 hours before applying a latex topcoat, overnight for oil topcoats.
Dry Time

Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 30 minute - 60 minute
Recoat: 2 hour
Clean-up & Disposal

Clean up with warm, soapy water.